User Manual Q&AAnswer
Dec 24, 2024 - 03:22 AM
To change the unit of measurement on the Jiavarry Electronic Digital Vernier Caliper, follow these steps:
1. Turn on the caliper by moving the jaws apart. The reading will appear on the LCD screen.
2. Press the unit switch button to cycle through the available units. The button is located on the front of the caliper, near the LCD screen.
3. Each press of the unit switch button will change the unit of measurement. The available units are millimeters (mm), inches (in), and fractions (F).
4. Release the unit switch button when the desired unit of measurement is displayed on the LCD screen.
5. The caliper will now measure in the selected unit until the unit is changed again.
Note: Make sure to select the appropriate unit of measurement for your specific needs to ensure accurate readings.
Add New Comment