User Manual Q&AAnswer
Dec 24, 2024 - 03:20 AM
To change the battery in the LOUISWARE QB_087 Electronic Digital Vernier Caliper, follow these steps:
1. Locate the battery compartment on the caliper. It is usually located on the back or side of the caliper.
2. Use the screwdriver that came with the caliper to remove the xxxx securing the battery compartment cover.
3. Once the cover is removed, you will see the CR2032 lithium battery inside the compartment.
4. Carefully remove the old battery from the compartment, taking note of its orientation.
5. Insert the new CR2032 lithium battery into the compartment, ensuring it is properly aligned with the positive (+) and negative (-) markings.
6. Replace the battery compartment cover and secure it with the xxxx using the screwdriver.
7. Turn on the caliper by sliding the jaws apart or pressing the power button, and check if the new battery is functioning properly.
Note: It is recommended to use a fresh CR2032 lithium battery for optimal performance. Always handle batteries with care and dispose of old batteries properly according to local regulations.
Add New Comment