User Manual Q&AAnswer
Dec 24, 2024 - 03:18 AM
To change the battery in the LOUISWARE MBF4-1 Electronic Digital Micrometer Caliper, please follow these step-by-step instructions:
1. Locate the battery compartment on the back of the caliper. It is usually a small rectangular compartment with a xxxx or latch.
2. Use a screwdriver or your fingers to open the battery compartment.
3. Take note of the orientation of the existing battery. It should indicate which side is positive (+) and which side is negative (-).
4. Remove the old battery from the compartment, taking care not to damage any components.
5. Insert a new LR44 battery into the compartment, making sure to align the positive and negative ends correctly according to the markings.
6. Close the battery compartment securely, ensuring that it is tightly sealed to prevent any moisture or debris from entering.
7. Turn on the caliper by pressing the "ON/OFF" button. The digital display should light up, indicating that the new battery is working properly.
Note: The LOUISWARE MBF4-1 Electronic Digital Micrometer Caliper typically uses LR44 batteries, but it's always a good idea to check the user manual or the battery compartment for any specific battery requirements.
If you encounter any difficulties or have further questions, please refer to the user manual that came with your LOUISWARE MBF4-1 Electronic Digital Micrometer Caliper for more detailed instructions and illustrations.
Add New Comment