User Manual Q&AAnswer
Dec 24, 2024 - 02:43 AM
Installing the TomCare SZ-20001 solar lights is quick and easy. Here are the step-by-step instructions:
1. Choose the installation location: Select a spot in your outdoor area that receives direct sunlight throughout the day. This will ensure optimal charging of the solar panel.
2. Assemble the lights: Attach the poles to the solar lights by inserting them into the connectors. Make sure they are securely connected.
3. Prepare the ground: Use a shovel or a small garden tool to dig a small hole in the ground where you want to install each light. The hole should be deep enough to accommodate the ground stake.
4. Insert the ground stake: Take one of the ground stakes provided and insert it into the hole you just dug. Make sure it is firmly planted in the ground.
5. Attach the light to the ground stake: Slide the bottom end of the pole with the solar light onto the ground stake. It should fit snugly into place.
6. Repeat for the remaining lights: Repeat steps 3-5 for each of the remaining solar lights included in the package.
7. Test the lights: Once all the lights are installed, turn the switch on the solar panel to the "ON" position. The lights should automatically turn on at dusk and turn off at dawn.
That's it! Your TomCare SZ-20001 solar lights are now installed and ready to illuminate your outdoor space. Enjoy the warm, flickering flame effect and the eco-friendly lighting provided by these solar-powered lights.
Add New Comment