User Manual Q&AAnswer
Dec 24, 2024 - 02:39 AM
Installing the TomCare 43 Waterproof Solar Lights is quick and easy. Here are the step-by-step instructions:
1. Choose the installation location: Select the area in your yard or garden where you want to install the solar lights. Make sure the location receives direct sunlight during the day for optimal charging.
2. Assemble the lights: Take each solar light and separate the stake from the main body. Insert the stake into the bottom of the light until it is firmly attached.
3. Prepare the ground: If the ground is hard or compacted, it is recommended to soften it by watering the area or using a small shovel or garden trowel to loosen the soil.
4. Position the lights: Place the lights in the desired locations, ensuring they are evenly spaced and aligned. Make sure the solar panels on top of the lights are facing the sun.
5. Insert the stakes: Push the stakes firmly into the ground until the lights are secure. Ensure that the lights are stable and not wobbly.
6. Test the lights: Once all the lights are installed, switch the lights to the "ON" position. The built-in light sensor will automatically turn the lights on at dusk and off at dawn.
7. Allow for charging: Leave the lights in the "ON" position and allow them to charge in direct sunlight for at least 8 hours. This will ensure the batteries are fully charged for optimal performance.
8. Enjoy the lighting: Once the lights have fully charged, they will automatically illuminate at night, creating a beautiful flickering flame effect.
Note: It is important to regularly clean the solar panels with a soft cloth or brush to remove any dirt or debris that may obstruct sunlight absorption. This will help maintain the efficiency of the solar lights.
For any further assistance or troubleshooting, please refer to the TomCare 43 Waterproof Solar Lights User Manual.
Add New Comment