User Manual Q&AAnswer
Dec 24, 2024 - 02:14 AM
To change the unit of measurement on the LOUISWARE LCD01 Electronic Digital Vernier Caliper, follow these steps:
1. Turn on the caliper by pressing the ON/OFF button.
2. Once the caliper is turned on, press the button labeled "Unit" or "mm/in" (depending on the specific model) to toggle between inches and millimeters.
3. Each press of the button will switch the unit of measurement. The current unit of measurement will be displayed on the LCD screen.
4. Choose the desired unit of measurement by pressing the button until the desired unit is displayed on the screen.
5. The caliper will now measure in the selected unit (inches or millimeters) for all subsequent measurements.
Note: It is important to ensure that the caliper is turned on before attempting to change the unit of measurement. If the unit conversion button does not respond or the unit does not change, please refer to the troubleshooting section of the manual or contact LOUISWARE customer support for further assistance.
Add New Comment