User Manual Q&AAnswer
Dec 24, 2024 - 02:07 AM
Calibrating the REXBETI REX014 Professional Digital Micrometer is a straightforward process. Here are the steps to calibrate the micrometer:
1. Power on the micrometer by pressing the power button.
2. Close the needle and press the zero button to ensure the micrometer is at zero.
3. Choose the unit of measurement (inch or metric) by pressing the unit button.
4. Hold the micrometer tightly but gently to avoid any interference with the readings.
5. Place the object you want to measure between the wheel and the anvil.
6. Slowly rotate the thimble to close on the object until the ratchet mechanism clicks. This indicates the correct tension.
7. Read the measurement displayed on the LCD screen.
8. To lock the spindle and keep the measurement, use the lock function.
9. After taking a measurement, check if the micrometer reads 0 when fully closed. If it doesn't, recalibrate it by closing the needle and pressing the zero button again.
10. Repeat the calibration process for consistent and accurate measurements.
It's important to note that the REXBETI REX014 Professional Digital Micrometer comes factory calibrated, so you may not need to calibrate it initially. However, regular calibration checks are recommended to ensure ongoing accuracy. For more detailed instructions and illustrations, please refer to the user manual provided with the micrometer.
Add New Comment