Answer
Dec 24, 2024 - 01:58 AM
Installing the innoAura PlayStation 5 Cooling Vents is a simple process. Here are the step-by-step instructions:
1. Lay the Console Flat: Begin by placing your PlayStation 5 on a flat, stable surface. Ensure the console is turned off and unplugged to avoid any electrical issues during the installation process.
2. Remove the Original Case: To remove the existing faceplate, press down on the diagonal edges of the plate. Carefully lift the plate up and towards the left to detach it from the console. Set the original faceplate aside.
3. Align the New Plate: Take the innoAura faceplate and align the holes on the plate with the corresponding slots on the console. Position the plate as indicated by the arrow direction to ensure proper alignment.
4. Secure the New Plate: Push the new faceplate to the right until you hear a click. This sound indicates that the plate has been securely attached to the console. Double-check to make sure the plate is firmly in place, ensuring a successful installation.
Once the faceplate is securely installed, you can snap the cooling vents onto the back of your PlayStation 5. Ensure that they are securely attached. Connect the USB cable to one of the PlayStation 5's USB ports to power the cooling fans. The fans will start automatically when the console is powered on, providing continuous cooling.
If you have any further questions or encounter any issues during the installation process, please refer to the user manual provided with the innoAura PlayStation 5 Cooling Vents or contact the innoAura customer support team for assistance.
Add New Comment