User Manual Q&AAnswer
Dec 24, 2024 - 01:57 AM
To switch between units of measurement on the Kynup 02-004-2 Digital Micrometer Caliper, follow these steps:
1. Make sure the caliper is turned on by pressing the ON/OFF button.
2. Look for the "unit conversion" button on the caliper. It is usually labeled with a unit symbol or abbreviation.
3. Press the "unit conversion" button to cycle through the available units of measurement. Each press will switch to the next unit in the sequence.
4. The available units on the Kynup 02-004-2 Digital Micrometer Caliper include fractions, inches, and millimeters. Keep pressing the "unit conversion" button until you reach the desired unit.
5. The unit of measurement will be displayed on the large LCD screen of the caliper.
6. Once you have selected the desired unit, you can proceed with taking measurements in that unit.
Note: The caliper may also have additional units of measurement available, depending on the model. Refer to the user manual for specific instructions on unit conversion for your particular model.
If you encounter any difficulties or have further questions, please consult the user manual provided with the Kynup 02-004-2 Digital Micrometer Caliper for more detailed instructions and illustrations.
Add New Comment