User Manual Q&AAnswer
Dec 24, 2024 - 01:35 AM
To install the Segotep GN-650 Power Supply in your computer, follow these steps:
1. Ensure that your computer is powered off and unplugged from the wall outlet.
2. Open your computer case to access the internal components.
3. Locate the existing power supply in your computer and disconnect all cables connected to it, including the 24-pin main connector.
4. Remove the existing power supply from your computer.
5. Take the Segotep GN-650 Power Supply and align it with the power supply mounting holes in your computer case.
6. Secure the power supply in place using the appropriate screws.
7. Connect the 24-pin main connector from the power supply to the corresponding motherboard socket.
8. Connect any additional power cables required by your components, such as the CPU power connector and graphics card power connectors.
9. Ensure that all cables are securely connected and properly routed to avoid any interference with other components.
10. Close your computer case and secure it with the screws.
11. Plug in your computer and turn it on to test the new power supply.
Please refer to the Segotep GN-650 Power Supply User Manual for more detailed instructions and illustrations specific to your computer setup.
Add New Comment