User Manual Q&AAnswer
Dec 24, 2024 - 01:34 AM
To change the batteries in the Energizer 039800138958 IPX4 Water Resistant Tent Light, please follow these steps:
1. Make sure the tent light is turned off and remove any objects or obstructions from the battery compartment.
2. Locate the battery compartment on the bottom of the tent light. It is usually secured with a latch or xxxx .
3. Depending on the battery type you are using, either D or AA batteries, remove the old batteries from the compartment by gently pulling them out.
4. Take three fresh D or AA batteries (not included) and ensure they are properly aligned with the positive (+) and negative (-) terminals.
5. Insert the new batteries into the battery compartment, making sure they fit snugly and are in the correct orientation.
6. Close the battery compartment securely, ensuring that the latch or xxxx is properly fastened.
7. Turn on the tent light to test if the new batteries are working properly. If the light does not turn on, double-check the battery installation and try again.
Note: It is recommended to use fresh Energizer D or AA batteries for optimal performance and longer battery life. Always dispose of old batteries properly and follow local regulations for battery recycling.
For more detailed instructions and illustrations, please refer to the user manual provided with the Energizer 039800138958 IPX4 Water Resistant Tent Light.
Add New Comment