User Manual Q&AAnswer
Dec 24, 2024 - 01:26 AM
To install the Mirrea B12A108 Outdoor Porch Light, follow these steps:
1. Ensure the power breaker is turned off before starting the installation process to prevent electrical shock.
2. Check that all the components are included in the package and that none are missing or damaged. If any parts are missing or damaged, contact your dealer for replacement.
3. Clean the wall surface where you plan to mount the light to ensure proper adhesion.
4. Attach the mounting bracket to the wall using the included mounting hardware (screws and anchors).
5. Connect the wires from the electrical box to the corresponding wires on the light fixture. Make sure no bare wire strands are exposed outside the wire connectors to avoid fire or electrical shock.
6. Securely attach the light fixture to the mounting bracket using the provided screws.
7. Once the fixture is mounted, caulk the space between the wall and the upper 3/4 area of the wall plate to prevent water seepage into the outlet box. Leave the bottom 1/4 area un-caulked for drainage of any water that might leak into the enclosure.
8. Turn on the power breaker to test the light. If it doesn't turn on, double-check the bulb installation and ensure the power supply is properly connected.
9. Refer to the user manual for additional troubleshooting tips and safety precautions.
Please note that this is a general installation guide. For specific instructions and diagrams, please refer to the Mirrea B12A108 Outdoor Porch Light User Manual.
Add New Comment