User Manual Q&AAnswer
Dec 24, 2024 - 01:22 AM
To operate the PDGROW PD-66 LED Flame Lights, you can use the included remote control. Here are the steps to follow:
1. Make sure the lights are fully charged before use. The charging time is approximately 4 hours.
2. Once charged, plug the lights into an electrical outlet.
3. Use the remote control to power on the lights by pressing the "ON" button. The lights should start producing a realistic flame effect.
4. To adjust the brightness of the lights, use the brightness buttons on the remote control. You can increase or decrease the brightness levels according to your preference.
5. The PDGROW PD-66 LED Flame Lights offer four lighting modes: realistic dancing flames, soft breathing flames, constant warm light, and gravity-induced flame effect. Use the mode button on the remote control to switch between these modes.
6. If you want to set a timer for the lights to automatically turn off after a certain period, use the timer button on the remote control. You can choose between 1, 2, 3, or 4 hours for the timer duration.
7. To power off the lights, press the "OFF" button on the remote control.
Note: If you encounter any issues with the lights or remote control, refer to the troubleshooting section in the user manual or contact customer support for further assistance.
Add New Comment