User Manual Q&AAnswer
Dec 24, 2024 - 12:16 AM
Installing the BlueYang LUCKSEN002 Solar Post Flame Light is easy and requires no wiring. Here are the step-by-step instructions:
1. Choose the installation location: Select a spot that receives direct sunlight during the day for optimal charging.
2. Insert the ground stakes: Take the included ground stakes and insert them into the ground where you want to install the lights. Make sure the stakes are securely placed.
3. Attach the lights to the stakes: The lights have a cylindrical shape with a flat bottom. Place the flat bottom of the light onto the top of the stake and press down firmly to secure it in place.
4. Test the lights: Before fully securing the lights, turn them on to ensure they are working properly. Locate the ON/OFF switch on the underside of the light and switch it to the ON position. The lights should turn on automatically at dusk and off at dawn.
5. Secure the lights: Once you have confirmed that the lights are working, press down firmly on the lights to ensure they are securely attached to the ground stakes.
6. Adjust the angle: If desired, you can adjust the angle of the lights by gently tilting them in the desired direction.
7. Enjoy your new solar post flame lights: With the lights securely installed, you can now enjoy the realistic flickering flame effect and the warm ambiance it creates in your outdoor space.
Please refer to the user manual for any additional information or troubleshooting tips.
Add New Comment