User Manual Q&AAnswer
Dec 23, 2024 - 11:58 PM
To change the battery in the JUSTTOP DTPG Digital Tire Pressure Gauge, please follow these steps:
1. Make sure the device is turned off and remove any pressure tap from the tire valve.
2. Locate the battery compartment on the back of the gauge.
3. Use your fingernail or a small tool to slide the battery compartment cover open.
4. Take out the old AAA battery from the compartment.
5. Insert a new AAA battery into the compartment, making sure to align the positive (+) and negative (-) ends correctly according to the polarity signs inside the compartment.
6. Slide the battery compartment cover back into place until it clicks and locks securely.
7. Turn on the gauge to check if the new battery is working properly.
Note: It is recommended to use a fresh AAA battery for optimal performance. Regularly check the battery to ensure the device is functioning correctly. If the gauge does not turn on or the display is dim, try replacing the battery with a new one.
For more detailed instructions, please refer to the "Setup Guide" section of the JUSTTOP DTPG Digital Tire Pressure Gauge Operating Manual.
Add New Comment