User Manual Q&AAnswer
Dec 23, 2024 - 11:57 PM
To change the unit of measurement on the TIRETEK UM2200 Digital Tire Pressure Gauge, follow these steps:
1. Start the Gauge: Press the power button to turn on the digital monitor.
2. Choose the Pressure Unit: If your gauge has more than one unit, like PSI, BAR, or KPA, choose the one that works best for you.
3. Press and Hold the Unit Button: Look for a button on the gauge labeled "Unit" or with the unit symbols (e.g., PSI, BAR, KPA). Press and hold this button for a few seconds until the unit on the display changes.
4. Release the Button: Once the unit on the display changes to your desired unit of measurement, release the unit button.
5. Confirm the Unit: Check the digital display to ensure that the unit of measurement has been successfully changed. The gauge will now display tire pressure readings in the selected unit.
Note: The specific steps to change the unit of measurement may vary slightly depending on the model of the TIRETEK UM2200 Digital Tire Pressure Gauge you have. Refer to the instruction manual provided with your gauge for detailed instructions and any additional features specific to your model.
Add New Comment