User Manual Q&AAnswer
Dec 23, 2024 - 11:50 PM
Mounting the MidTen 4-16X50AOEG Sight & Laser Rangefinder on your gun is a straightforward process. Here are the step-by-step instructions:
1. Start by ensuring that your gun has a 20mm Picatinny or rail system, as the scope is compatible with these mounting options.
2. Locate the included 22mm Picatinny or Weaver rail that comes with the scope. This rail will be used to mount the scope on your gun.
3. Position the rail on top of your gun's Picatinny or rail system. Make sure it fits securely and aligns with the gun's centerline for accurate shooting.
4. Once the rail is in position, use the provided Allen keys to tighten the screws on the rail. Ensure that the screws are tightened securely to prevent any movement or slippage during use.
5. Place the scope onto the mounted rail, aligning it with the rail's slots. Slide the scope forward until it reaches the desired position.
6. Once the scope is in place, use the Allen keys to tighten the screws on the scope rings. Again, ensure that the screws are tightened securely to maintain stability.
7. Double-check the alignment of the scope to ensure it is properly centered and aligned with your gun's barrel.
8. Once the scope is securely mounted, you can make further adjustments such as setting the eye relief and zeroing the scope for accurate shooting. Refer to the user manual for detailed instructions on these adjustments.
By following these steps, you should be able to properly mount the MidTen 4-16X50AOEG Sight & Laser Rangefinder on your gun.
Add New Comment