User Manual Q&AAnswer
Dec 23, 2024 - 11:46 PM
To connect your Moonka ZN-DP1002 Digital Photo Frame to Wi-Fi, please follow these steps:
1. Ensure that your Wi-Fi network is available and stable before setting up the frame.
2. On the frame's tablet, go to the settings page.
3. Look for the Wi-Fi settings option and tap on it.
4. A list of available Wi-Fi networks will appear. Select your network from the list.
5. If prompted, enter the password for your Wi-Fi network using the on-screen keyboard.
6. Once the correct password is entered, tap on the "Connect" button.
7. The frame will attempt to connect to the Wi-Fi network. Wait for a few moments for the connection to be established.
8. Once connected, you should see a confirmation message on the screen indicating a successful Wi-Fi connection.
Note: The Moonka ZN-DP1002 Digital Photo Frame only supports 2.4GHz Wi-Fi networks. Make sure your network is operating on this frequency.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with your Moonka ZN-DP1002 Digital Photo Frame.
Add New Comment