User Manual Q&AAnswer
Dec 23, 2024 - 11:27 PM
Installing the Derynome JM-011 Hanging Waterproof Lantern Light is a straightforward process. Here are the step-by-step instructions:
1. Determine the installation location: Choose a location with sufficient sunlight exposure during the day. This will ensure that the solar panel can charge effectively.
2. Mounting options: The lantern can be installed using the provided chain/hook or mounted directly to an exterior wall or fence using the included screws and brackets.
3. Hanging installation: If you prefer to hang the lantern, use the provided chain/hook. Find a suitable location, such as a shepherd hook, plant hook, or wall hook, and hang the lantern securely.
4. Wall mounting installation: If you choose to mount the lantern to an exterior wall or fence, follow these steps:
a. Position the lantern against the desired mounting surface.
b. Mark the locations for the xxxx holes using a pencil or marker.
c. Drill pilot holes at the marked locations to make it easier to insert the screws.
d. Attach the mounting brackets to the lantern using the provided screws.
e. Align the brackets with the pilot holes and secure the lantern to the wall or fence using the provided screws.
5. Switch ON: Before charging the lantern, ensure that the switch located at the bottom of the lantern is turned ON. This will enable the automatic operation of the lantern.
6. Charging: Place the lantern in a location where it will receive direct sunlight for at least 6 hours per day. The solar panel will collect sunlight and convert it into electrical energy to power the light at night.
Following these steps will ensure a successful installation of the Derynome JM-011 Hanging Waterproof Lantern Light. For additional information or troubleshooting, please refer to the user manual provided with the product.
Add New Comment