User Manual Q&AAnswer
Dec 23, 2024 - 11:01 PM
To replace the batteries in the LEWISER Battery Operated Interactive Chickadee, please follow these steps:
1. Turn off the toy: Before replacing the batteries, make sure the toy is turned off. Locate the switch control system and switch it to the "off" position.
2. Open the battery compartment: Look for the battery compartment on the toy. It is usually located on the underside or back of the toy. Use a small screwdriver or your fingernail to gently open the compartment.
3. Remove the old batteries: Take out the old AA batteries from the battery compartment. Pay attention to the battery orientation and make sure to dispose of them properly.
4. Insert new batteries: Insert fresh AA batteries into the battery compartment, making sure to align the positive (+) and negative (-) ends correctly. Follow the polarity markings inside the compartment.
5. Close the battery compartment: Once the new batteries are in place, carefully close the battery compartment, ensuring it is securely fastened. Make sure there are no gaps or loose parts.
6. Test the toy: Turn on the toy by switching the control system to the "on" position. Listen for sounds and observe the movement to confirm that the toy is working properly with the new batteries.
Note: It is recommended to use high-quality AA batteries for optimal performance and longer battery life. If the toy still does not work after replacing the batteries, double-check the battery orientation and make sure the switch control system is in the correct position. If the issue persists, contact LEWISER customer service for further assistance.
Add New Comment