User Manual Q&AAnswer
Dec 23, 2024 - 10:23 PM
Sure! Here are the step-by-step instructions for assembling and operating the Rhode Island Novelty EL-ALIHE 13-Inch Alien Head Lamp:
1. Unbox the lamp: Remove the lamp and all included components from the packaging.
2. Insert batteries: The lamp requires 3 x AA batteries (not included) for operation. Locate the battery compartment on the bottom of the lamp and open it. Insert the batteries according to the polarity markings inside the compartment.
3. Power on the lamp: Once the batteries are inserted, locate the toggling switch on the base of the lamp. Flip the switch to the "ON" position to power on the lamp.
4. Touch control: The lamp features a touch-sensitive control for easy operation. To turn on the lamp, simply touch the base of the lamp. Touch it again to turn it off.
5. Wax motion effect: The lamp uses a wax motion effect to create a mesmerizing glow. After turning on the lamp, give it a few minutes to warm up. The wax globules will start floating and swirling inside the alien head, creating a captivating visual effect.
6. Adjusting the wax flow: If the wax inside the lamp appears stuck or not flowing properly, gently move the lamp to a warmer area. This will help soften the wax and encourage it to flow freely.
7. Care and maintenance: To keep the lamp in good condition, regularly dust it with a soft, dry cloth. Avoid exposing the lamp to moisture or liquids, as it is not water-resistant. If the lamp needs cleaning, wipe it gently with a soft, dry cloth.
Please note that these instructions are a general guide. For more detailed information, refer to the instruction manual included with the lamp.
Add New Comment