User Manual Q&AAnswer
Dec 23, 2024 - 09:05 PM
Sure! Here are step-by-step instructions on how to assemble the BRIO 33061 Cargo Harbor Set:
1. Unbox the Set: Take all 16 pieces out of the box and make sure there are no missing small parts.
2. Set Up the Tracks: To start, put the 8 track pieces in the order you want them.
3. Putting the Motorized Train Together: Put the motorized train on the tracks and add two AAA batteries to it.
4. Prepare the Cargo Ship: Put the cargo ship's hinged storage bay doors in place.
5. Place the Drawbridge: On the track plan, put the moveable drawbridge where you want it.
6. Bring the Goods on Board: Use the crane to bring goods on board the cargo ship.
7. Place the Crane: Put the multi-use, pivoting crane close to the cargo ship so it's easy to get to the goods.
8. Put Goods on the Train: Use the magnetic boom arm of the crane to pick up the goods and put them in the ready boxcar.
9. Close the Boxcar Doors: To keep the goods inside safe, slide the boxcar doors shut.
10. Start the Train: To get the train going forward along the track, press the button on the engine.
11. Raise the Bridge: To make room for the ship or train, use the red button to raise the drawbridge.
12. Make Sure the Safety Gate Is Open: Before letting the train go over the bridge, make sure the safety gate is open.
13. To play with the set, you can move the train along the track, run the crane, and play with the goods.
14. Expand the Track Layout: If you want to make the setup bigger, you can add more BRIO train pieces.
15. Clean up: When you're done playing, put all the pieces away carefully somewhere safe so they are easy to find again next time.
These steps should help you assemble the BRIO 33061 Cargo Harbor Set and start enjoying its features. If you need further assistance, please refer to the user guide that came with the set.
Add New Comment