User Manual Q&AAnswer
Dec 23, 2024 - 08:52 PM
Installing the ANUOMY 250 Battery Operated Light Bulb is a simple process. Here are the step-by-step instructions:
1. Choose the location: Decide where you want to install the light bulb. It can be used in various fixtures such as wall lamps, ceiling lights, or pendant lights.
2. Ensure compatibility: Check if the fixture supports an E26 base, as the ANUOMY 250 has an E26 medium xxxx base. If the bulb is too large for the fixture, you can use an E26 adapter extension for compatibility.
3. Insert batteries: Unscrew the bottom of the light bulb to access the battery compartment. Insert 3 AA batteries into the compartment, ensuring they are inserted correctly according to the polarity markings.
4. xxxx in the bulb: xxxx the ANUOMY 250 light bulb into the E26 socket, turning it clockwise until it is securely in place. Make sure it is tightened properly to ensure a good connection.
5. Test the light: Turn on the light by using the remote control or the touch-sensitive switch on the bulb. If the light does not turn on, check the battery placement and ensure they are fully charged. Replace the batteries if necessary.
6. Adjust settings: Use the remote control to adjust the brightness, switch between light modes (Warm White or Soft White), and set timers for automatic shut-off. The remote control also allows you to turn the light on/off from a distance.
That's it! Your ANUOMY 250 Battery Operated Light Bulb is now installed and ready to use. If you encounter any issues during installation or have further questions, refer to the user manual for troubleshooting tips or contact the manufacturer's customer support for assistance.
Add New Comment