User Manual Q&AAnswer
Dec 23, 2024 - 08:43 PM
Installing the BSOD AC85-2695V 7W Warm White Emergency Light is a simple process. Here are the step-by-step instructions:
1. Choose a suitable location: Select the area where you want to install the light. Ensure that the socket is easily accessible and that the light will provide adequate illumination in that area.
2. Turn off the power: Before installing the light, make sure to turn off the power supply to the socket where you will be installing it. This is important for your safety.
3. xxxx in the light bulb: Take the BSOD AC85-2695V 7W Warm White Emergency Light and xxxx it into the E26/E27 socket. Make sure to securely tighten the bulb to ensure proper contact and operation.
4. Turn on the power: Once the light bulb is securely installed, you can turn on the power supply to the socket. The light should turn on and provide illumination.
5. Test the emergency mode: To test the emergency mode, remove the light bulb from the socket. The light should automatically switch to flashlight mode, providing emergency lighting. This feature ensures that you have a backup light source during power outages.
Note: If you encounter any issues during the installation process or have further questions, please refer to the user manual provided with the product. It contains detailed instructions and troubleshooting tips to help you with the installation and usage of the BSOD AC85-2695V 7W Warm White Emergency Light.
Add New Comment