User Manual Q&AAnswer
Dec 23, 2024 - 08:41 PM
To operate the Bright Zeal 12031 LED Flickering Flameless Candle, follow these steps:
1. Insert Batteries: Open the battery compartment at the base of the candle and insert 3 AA batteries (included) into the designated slots. Ensure proper alignment of the batteries.
2. Power On/Off: Locate the ON/OFF/TIMER switch at the bottom of the candle. Slide the switch to the ON position to turn the candle on. Slide it to the OFF position to turn the candle off.
3. Timer Function: The Bright Zeal 12031 LED Candle has a timer function that allows you to set it and forget it. To activate the timer, slide the ON/OFF/TIMER switch to the TIMER position. The candle will automatically light up for 6 hours and then turn off for the next 18 hours. This cycle will repeat until you manually turn off the candle or change the timer setting.
4. Placement: You can place the candle anywhere you'd like to add a cozy ambiance, such as windowsills, mantels, dining tables, or bathrooms. The candle is designed for indoor use only and is not water-resistant.
Note: If the candle is not turning on, make sure the batteries are inserted correctly and that they have enough power. If the flickering effect is not working or the LED light is too dim, try replacing the batteries with fresh ones. If you encounter any other issues, refer to the troubleshooting section in the user manual or contact Bright Zeal customer support for assistance.
Remember to follow the care and maintenance instructions provided in the user manual to keep your Bright Zeal 12031 LED Flickering Flameless Candle in optimal condition.
Add New Comment