User Manual Q&AAnswer
Dec 23, 2024 - 06:55 AM
Installing the ElecGear TP4-894US Automatic Temperature Controlled Cooler on your PS4 Pro is a simple process. Here are the step-by-step instructions:
1. Make sure your PS4 Pro is turned off and unplugged from the power source.
2. Take the ElecGear TP4-894US cooler and align it with the back of your PS4 Pro.
3. Gently slide the cooler onto the console, ensuring that the ports on the cooler align with the corresponding ports on the PS4 Pro.
4. Apply gentle pressure to snap the cooler securely onto the console. You should hear a click when it is properly attached.
5. Once the cooler is attached, connect the USB power cable to the USB port on the cooler.
6. Plug the other end of the USB power cable into any available USB port on your PS4 Pro.
7. Ensure that the cooler is securely attached and the USB power cable is properly connected.
8. Turn on your PS4 Pro and the cooler will automatically start functioning.
Please refer to the user manual provided with the ElecGear TP4-894US Automatic Temperature Controlled Cooler for any additional information or troubleshooting tips.
Add New Comment