How do I install the OWC ‎OWCSPS4H5S2.0 Drive Upgrade Kit? (OWC ‎2.0TB Drive Upgrade Kit User Manual)

Answer

manuals.plus

Dec 23, 2024 - 06:48 AM


To install the OWC ‎OWCSPS4H5S2.0 Drive Upgrade Kit, please follow the steps below:

1. Preparation: Before starting the upgrade, make sure to back up your data. Ensure that your PS4 is turned off and unplugged.

2. Installation: Use the included screwdriver and screws to replace your PS4's internal hard drive with the new 2.0TB drive. Follow the installation guide provided in the package for detailed instructions. The guide will walk you through the process of removing the old drive and installing the new one.

3. Software Installation: After the hardware upgrade, you will need to install the necessary software. Use the PlayStation 4 System Software Reinstallation Drive included in the package to install the software. Follow the instructions provided with the reinstallation drive to complete the software installation.

4. External Drive Setup: If you want to use your old drive as additional storage or for data transfer, insert it into the USB 3.0 external enclosure included in the kit. The enclosure is compatible with both USB 2.0 and 3.0 ports. You can connect the enclosure to any USB-equipped computer or device.

Please note that it is important to carefully handle the drive and PS4 during installation to avoid any physical damage. Regularly back up your data to prevent data loss, and ensure your PS4's firmware is always up to date for compatibility and performance. Additionally, make sure your PS4 is well-ventilated to prevent overheating.

For further assistance or clarification, you can refer to the  or contact OWC customer support at the provided phone number or email address.