User Manual Q&AAnswer
Dec 23, 2024 - 05:35 AM
To set up the LeapFrog 32950 Recharger Pack, please follow these steps:
1. Unpack the recharger pack and remove the rechargeable battery pack and AC adapter from the packaging.
2. If your LeapPad 2 tablet's batteries are not already installed, open the battery compartment and insert four AA batteries.
3. Orient the provided rechargeable battery pack correctly in the compartment and replace the AA batteries with it.
4. Insert the AC adapter into the charging connector of your LeapPad 2 tablet.
5. Plug the other end of the AC adapter into a power outlet.
6. Allow the tablet's battery pack to reach its full charge for optimal results.
7. Keep an eye on the tablet's charging indicator to ensure it is charging correctly.
8. You can use the LeapPad 2 tablet while it is plugged in and undergoing charge.
9. Once the battery is fully charged, disconnect the AC adapter from the power source.
10. If you need to store or replace the rechargeable battery pack, remove it from the compartment.
11. To ensure effective charging, make sure the battery contacts are clear of debris and clean.
12. Store the rechargeable battery pack and AC adapter in a cool, dry location when not in use.
13. To avoid overcharging, disconnect the AC adapter as soon as the battery is fully charged.
14. Regularly inspect the battery pack for signs of wear or damage and replace it as needed.
For more detailed instructions and safety information, please refer to the LeapFrog 32950 Recharger Pack User Manual.
Add New Comment