User Manual Q&AAnswer
Dec 23, 2024 - 05:29 AM
To install the EVGA 500W Power Supply into your computer, follow these steps:
1. Remove the power supply from its packaging.
2. Use the screws provided with your case to install the power supply into your computer. It is recommended to install the power supply with the fan facing down. However, if your case places the power supply at the bottom and there are no ventilation holes available, it may be best to install the power supply with the fan facing up for greater efficiency and reliability.
3. Connect the 20+4-pin ATX cable to the motherboard.
4. Connect the 4+4-pin EPS12V cable to the motherboard.
5. Connect the 6/6+2-pin PCI-E cables to your graphic card(s).
6. Connect SATA power cables to all data drives or optical drives (hard drives, solid state drives, optical drives).
7. Connect the peripheral "Molex" 4-pin connectors for fans, pumps, legacy components, and other devices/adapters.
8. Connect the AC power cord to your power supply and to the wall.
9. Check all connections to ensure a solid connection and turn the power switch on the power supply to the ON position.
For more detailed information and illustrations, please refer to the EVGA 500W Power Supply User Manual.
Add New Comment