User Manual Q&AAnswer
Dec 23, 2024 - 05:13 AM
To change the light mode on the PEMOTech 119-0016-20 Portable Camping Light, follow these steps:
1. Locate the rubber button on the camping light. It is the only button on the device.
2. Press the rubber button once to turn on the light in the default high mode. The light will emit maximum brightness for large-area illumination.
3. Press the button again to switch to the low mode. This mode is ideal for prolonged use without draining the battery quickly.
4. Press the button a third time to activate the flashing mode. This mode is useful for signaling in emergencies or creating a party ambiance.
5. Press the button a fourth time to enter the SOS mode. This mode is a life-saving feature that can signal for help in emergencies, especially during outdoor activities or when lost.
6. To turn off the light, press and hold the rubber button for a few seconds until the light goes off.
Note: Each press of the button will cycle through the available light modes. The light will remember the last mode used when turned on again.
Please refer to the user manual provided with your PEMOTech 119-0016-20 Portable Camping Light for more detailed instructions and safety information.
Add New Comment