User Manual Q&AAnswer
Dec 23, 2024 - 04:00 AM
Installing the Helloify BA11 Candle Light Bulbs is a simple process. Here are the steps to follow:
1. Ensure the power is turned off: Before installing or replacing any light bulbs, make sure the power to the fixture is turned off at the circuit breaker or by switching off the wall switch.
2. Remove the old bulb: If there is an existing bulb in the fixture, carefully unscrew it counterclockwise and remove it from the socket. Allow the bulb to cool down if it was recently in use.
3. Prepare the new bulb: Take the Helloify BA11 Candle Light Bulb out of its packaging. Hold the bulb by the base to avoid putting pressure on the glass. Inspect the bulb for any signs of damage or defects.
4. Insert the bulb: Align the base of the Helloify BA11 Candle Light Bulb with the socket and gently xxxx it in clockwise. Ensure the bulb is securely in place but avoid overtightening.
5. Turn on the power: Once the bulb is installed, turn on the power at the circuit breaker or by switching on the wall switch. The Helloify BA11 Candle Light Bulb should now be illuminated.
Note: If the bulb does not light up, check that the socket has power and that the bulb is securely screwed in. If the issue persists, consult the troubleshooting section of the user manual or contact Helloify customer support for further assistance.
For more detailed instructions and safety precautions, please refer to the user manual provided with the Helloify BA11 Candle Light Bulbs.
Add New Comment