User Manual Q&AAnswer
Dec 23, 2024 - 04:00 AM
To assemble the , follow these steps:
1. Place 4 AA batteries in the battery compartment located on the bottom of the tower. Refer to page 8 of the instruction guide for detailed instructions on battery installation.
2. Fit the sun sphere over the LED light.
3. Attach the planet rods to the central tower. Each planet is printed with its own planetary symbol. Refer to the first three columns of the chart on page 4 for the correct order of the planets.
4. Start with the shortest rod, which represents Mercury, the closest planet to the sun. Insert this rod into the top ring of the central tower.
5. Attach the next shortest rod, which represents Venus, into the second ring from the top.
6. Continue attaching the rods with planets to the tower in the correct order. The tiny sphere attached to Earth represents the moon.
7. Once all the rods with planets are attached, you are ready to learn about the planets! Turn on the motor/lamp at the base of the tower and watch the model move and glow.
For more detailed instructions and information on using the star dome, refer to page 5 of the instruction guide.
Note: It is important to ensure that the batteries are correctly installed and fully charged for the motorized features to work properly.
Add New Comment