User Manual Q&AAnswer
Dec 23, 2024 - 03:30 AM
Installing the AsiaHorse 16-AWG PSU Extension Cable Kit is a straightforward process. Here are the step-by-step instructions:
1. Preparation: Ensure your PSU is unplugged and powered down to avoid any electrical hazards.
2. Installation:
a. Connect the 24-pin ATX extension cable to the motherboard and PSU. The 24-pin connector should align with the corresponding port on the motherboard, and the other end should be plugged into the PSU's 24-pin port.
b. Attach the 8-pin EPS cables to the CPU power connectors on the motherboard. These connectors are usually located near the CPU socket. Ensure that the connectors are fully seated and aligned with the ports.
c. Use the 6+2 pin PCI-E cables for GPU power. Connect one end of the cable to the GPU and the other end to the PSU's PCI-E port. If your GPU requires multiple power connectors, make sure to connect all the necessary cables.
3. Cable Management: Utilize the included cable combs to organize and route the cables neatly. The cable combs help in keeping the cables in place and preventing them from tangling or obstructing airflow.
4. Testing: After installation, power on your system to ensure all components receive stable power. Check if your PC boots up properly and if all components are functioning correctly.
Please refer to the AsiaHorse 16-AWG PSU Extension Cable Kit user manual for any specific instructions or illustrations that may assist you during the installation process.
Add New Comment