User Manual Q&AAnswer
Dec 23, 2024 - 03:25 AM
To power on the Donner EC885 Tuner Pedal, you will need to connect it to a power source. The pedal can be powered using either a 9V DC adapter or a USB cable.
Here are the steps to power on the pedal:
1. Connect the 9V DC adapter or USB cable to the appropriate power source (power outlet, power bank, or phone charger).
2. Plug the other end of the 9V DC adapter or USB cable into the power input jack on the Donner EC885 Tuner Pedal.
3. Once the power is connected, look at the LED light on the pedal. If the LED light turns on, it indicates that the pedal is powered on and ready to use.
Please note that the 9V DC adapter is not included with the purchase of the Donner EC885 Tuner Pedal and needs to be obtained separately. Ensure that you use a compatible power supply with the correct voltage and center-negative polarity to avoid any damage to the pedal.
Add New Comment