User Manual Q&AAnswer
Dec 23, 2024 - 03:20 AM
To operate the Enpornk ZW10001 Flameless Flickering LED Candles, follow these steps:
1. Insert Batteries: Open the battery compartment on the bottom of each candle and insert 2 AA batteries (not included) into each candle. Ensure the batteries are inserted correctly according to the polarity markings.
2. Turn On/Off: Use the included remote control to turn the candles on or off. Press the "ON" button to turn the candles on and the "OFF" button to turn them off.
3. Set Timer: The Enpornk ZW10001 candles have a timer function that allows you to set them to automatically turn on or off after a certain period of time. To set the timer, press the "TIMER" button on the remote control. Each press of the button will cycle through the timer options: 2 hours, 4 hours, 6 hours, and 8 hours. Choose the desired timer option by pressing the button until the desired time is displayed.
4. Adjust Brightness: You can adjust the brightness of the candles using the remote control. Press the "BRIGHT" button to increase the brightness and the "DIM" button to decrease the brightness. There are multiple brightness levels to choose from.
5. Flicker Modes: The Enpornk ZW10001 candles offer different flicker modes to create a realistic flame effect. Press the "MODE" button on the remote control to cycle through the available modes. Choose the mode that suits your preference.
6. Remote Control Range: The remote control has a range of approximately 16.4 feet (5 meters). Ensure that you are within this range for the remote control to work properly.
7. Battery Replacement: When the batteries in the candles run out, replace them with new AA batteries to continue using the candles.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment