User Manual Q&AAnswer
Dec 23, 2024 - 03:17 AM
Installing the GOLSPARK B11-E12-4000K-6P Candelabra LED Bulb is a simple process. Here are the step-by-step instructions:
1. Make sure the power is turned off: Before installing or removing the bulb, ensure that the power to the fixture is turned off. This will prevent any electrical hazards.
2. Remove the old bulb (if applicable): If there is an existing bulb in the fixture, carefully unscrew and remove it.
3. Prepare the GOLSPARK LED Bulb: Take the GOLSPARK B11-E12-4000K-6P LED Bulb out of the packaging. Inspect the bulb for any visible damage. If the bulb appears to be in good condition, proceed to the next step.
4. Align the base: Align the base of the LED bulb with the socket in the fixture. The GOLSPARK B11-E12-4000K-6P LED Bulb has an E12 base, which is a standard candelabra base. Ensure that the base is securely inserted into the socket.
5. xxxx in the bulb: Once the base is aligned, gently twist the bulb clockwise until it is securely screwed into the socket. Be careful not to overtighten the bulb.
6. Turn on the power: After the bulb is installed, turn on the power to the fixture. The GOLSPARK B11-E12-4000K-6P LED Bulb should now illuminate and provide bright, cool white light.
Note: If the bulb does not turn on after installation, double-check that the power is turned on and the bulb is securely screwed into the socket. If the issue persists, refer to the troubleshooting section of the user manual or contact GOLSPARK customer service for further assistance.
Please refer to the user manual for additional information and safety precautions.
Add New Comment