User Manual Q&AAnswer
Dec 23, 2024 - 03:00 AM
To change the batteries in the SANJOIN T-009 Talking Hamster, please follow these steps:
1. Locate the power compartment at the base of the hamster. It should be a small compartment that can be opened.
2. Make sure you have three AAA alkaline batteries ready for replacement. Please note that the batteries are not included with the toy.
3. Open the power compartment by gently pulling it open or using a small tool, if necessary.
4. Insert the three AAA batteries into the compartment, following the polarity markings inside. The markings should indicate the correct orientation for the positive (+) and negative (-) ends of the batteries.
5. Close the battery compartment securely to ensure it stays closed during use.
6. Find the power switch on the hamster and flip it to the "on" position.
7. If you want to test if the hamster can repeat your voice, speak or make a sound close to it. The hamster should start mimicking the sound.
Remember to dispose of the old batteries properly and use fresh batteries to ensure optimal performance. If you continue to experience issues with the hamster after replacing the batteries, please refer to the troubleshooting section of the user manual or contact SANJOIN customer support for further assistance.
Add New Comment