User Manual Q&AAnswer
Dec 23, 2024 - 02:57 AM
Installing the Simba Lighting JDR/25GU10 bulb is a straightforward process. Here are the step-by-step instructions:
1. Ensure that the power to the fixture is turned off. This is important for safety during the installation process.
2. Locate the existing bulb in your fixture and carefully remove it by twisting it counterclockwise. If there is a cover or lens on the fixture, remove it as well.
3. Take the Simba Lighting JDR/25GU10 bulb and align the prongs on the base with the slots in the fixture socket.
4. Insert the bulb into the socket and twist it clockwise until it is securely in place. You should feel a slight click or resistance when the bulb is properly installed.
5. If your fixture has a cover or lens, reattach it by aligning it with the fixture and twisting it clockwise until it is secure.
6. Once the bulb is installed, you can turn the power back on and test the light to ensure it is working properly.
Note: It is important to make sure that the Simba Lighting JDR/25GU10 bulb is compatible with your fixture's socket type. This bulb uses a GU10 twist-n-lock base, so it is essential to verify that your fixture has a matching GU10 socket before installation.
If you encounter any difficulties during the installation process or have further questions, please refer to the product information sheet included with the bulb or contact Simba Lighting's customer support for assistance.
Add New Comment