User Manual Q&AAnswer
Dec 23, 2024 - 02:39 AM
To replace the battery in your AGPTEK HL40B12 candle, follow these steps:
1. Make sure the candle is turned off. Twist the bottom portion of the candle counterclockwise until it is fully turned off.
2. Hold the candle securely in one hand and use your other hand to grip the bottom compartment of the candle.
3. Twist the bottom compartment of the candle counterclockwise to open it. You may need to apply a bit of pressure to break the seal.
4. Once the bottom compartment is open, you will see the CR2032 battery inside. Take note of the battery's orientation, with the positive side facing down.
5. Carefully remove the old battery from the compartment and dispose of it properly.
6. Take a new CR2032 battery and insert it into the compartment, ensuring that the positive side is facing down.
7. Close the bottom compartment by twisting it clockwise until it is securely closed. Make sure to twist it tightly to maintain the waterproof seal.
8. To test the new battery, twist the bottom portion of the candle clockwise to turn on the light. If the light is bright and steady, the battery replacement was successful.
By following these steps, you should be able to easily replace the battery in your AGPTEK HL40B12 candle and restore its brightness.
Add New Comment