User Manual Q&AAnswer
Dec 23, 2024 - 02:30 AM
Adjusting the voltage and current settings on the Kungber SPS3010B DC Power Supply is a straightforward process. Here's a step-by-step guide:
1. Make sure the power supply is connected to the appropriate input voltage (115V) and turned on.
2. Locate the coarse and fine adjustment knobs on the front panel of the power supply. These knobs are used to set the desired voltage and current levels.
3. To adjust the voltage, turn the voltage adjustment xxxx clockwise or counterclockwise. The coarse adjustment xxxx allows for larger increments, while the fine adjustment xxxx provides more precise control.
4. To adjust the current, turn the current adjustment xxxx clockwise or counterclockwise. Again, use the coarse adjustment xxxx for larger changes and the fine adjustment xxxx for finer adjustments.
5. As you adjust the voltage and current, monitor the LED display on the power supply. The display will show the real-time readings of the voltage and current levels.
6. Continue adjusting the knobs until you reach the desired voltage and current settings for your specific application.
It's important to note that the Kungber SPS3010B DC Power Supply offers a wide adjustment range, allowing you to set the voltage from 0 to 30V and the current from 0 to 10A. Take care not to exceed the maximum output capabilities of the power supply to avoid potential damage to your devices.
For more detailed instructions and safety precautions, please refer to the user manual provided with the Kungber SPS3010B DC Power Supply.
Add New Comment