How do I change the batteries in the LeapFrog 80-610800 Tickety Tock Play & Learn Clock? (LeapFrog Tickety Tock Play Learn Clock User’s Guide)

Answer

manuals.plus

Dec 23, 2024 - 02:19 AM

To change the batteries in the LeapFrog 80-610800 Tickety Tock Play & Learn Clock, please follow these steps:

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the xxxx and open the battery box.
4. Remove the old batteries by pulling up on one end of each battery.
5. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. It is recommended to use new alkaline batteries for maximum performance.
6. Replace the battery cover and tighten the xxxx to secure.

Please note the following battery guidelines:
- Use new alkaline batteries for maximum performance.
- Use only batteries of the same or equivalent type as recommended.
- Do not mix different types of batteries: alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
- Do not use damaged batteries.
- Insert batteries with the correct polarity.
- Do not short-circuit the battery terminals.
- Remove exhausted batteries from the toy.
- Remove batteries during long periods of non-use.
- Do not dispose of batteries in fire.
- Do not charge non-rechargeable batteries.
- Remove rechargeable batteries from the toy before charging (if removable).
- Rechargeable batteries are only to be charged under adult supervision.

If you have any further questions or need additional assistance, please refer to the LeapFrog 80-610800 Tickety Tock Play & Learn Clock User's Guide or contact LeapFrog Consumer Services at 1-800-701-5327 in the U.S. or email support@leapfrog.com.