User Manual Q&AAnswer
Dec 23, 2024 - 02:03 AM
To turn on the Wondise H3DGL-W-6 Flickering Taper Candles, please follow these steps:
1. Ensure that the candles are properly inserted into their holders or placed in a suitable location.
2. Locate the battery compartment at the bottom of each candle and make sure it is closed securely.
3. Insert two AAA batteries (not included) into the battery compartment, ensuring the correct polarity (+/-).
4. Once the batteries are installed, you should see a small switch at the bottom of each candle. Slide the switch to the "ON" position.
5. Now, take the remote control and point it towards the candles.
6. Press the "ON" button on the remote control to turn on the candles. The LED bulbs inside the candles should start flickering, creating a realistic flame effect.
If the candles still do not turn on after following these steps, please check if the batteries are properly installed and if they are fresh. If the issue persists, you may need to contact Wondise customer service for further assistance.
Note: The remote control allows you to control multiple functions of the candles, including turning them on or off, adjusting the brightness, changing the flicker mode, and setting the timer. Make sure to refer to the user manual for detailed instructions on using the remote control and its various functions.
Add New Comment