User Manual Q&AAnswer
Dec 23, 2024 - 01:57 AM
To turn on the ALED LIGHT Electric LED Candles Light, please follow these steps:
1. Insert Batteries: Open the battery compartment located at the bottom of each candle. Insert two AA batteries (not included) into each candle, ensuring the correct polarity.
2. Remove Plastic Sheet: Before using the remote control, make sure to remove the plastic sheet inside the remote control to activate the battery.
3. Candle Operation: To turn on the candles manually, simply switch the bottom ON/OFF button to the ON position. The candles will start emitting a warm glow, simulating the flickering of a real candle flame.
4. Remote Control Operation: To control the candles using the remote control, point the remote control towards the candles and press the desired buttons. The remote control allows you to turn the candles on or off, adjust the brightness levels, and select different flickering modes.
5. Flickering Modes: The ALED LIGHT Electric LED Candles Light offers various flickering modes to suit your preference. Use the remote control to switch between different modes, such as steady light, slow flicker, fast flicker, and more.
6. Color Selection: If your ALED LIGHT candles have the multicolor feature, you can use the remote control to change the color of the lower half of the candle. Press the color buttons on the remote control to cycle through different colors or select the warm white option for a classic candle glow.
7. Timer Function: Some models of the ALED LIGHT candles have a built-in timer function. To activate the timer, press the TIMER button on the remote control. The candles will automatically turn on for 6 hours and then turn off for 18 hours, repeating the cycle until manually turned off.
Please refer to the ALED LIGHT Electric LED Candles Light User Manual for more detailed instructions and troubleshooting tips.
Add New Comment