User Manual Q&AAnswer
Dec 23, 2024 - 01:34 AM
To assemble the Leapfrog 80-604201 Scout's Get Up & Go Walker, please follow these steps:
1. Attach the Walker Legs: Insert the Leg Screws into the xxxx holes on the bottom of the Activity Panel.
2. Adjust the Angle: Adjust the desired angle of the Activity Panel and tighten each leg xxxx until you hear a "click". The click signals when the safety lock has been enabled.
3. Attach the Handle: Press the Handle firmly into the Activity Panel.
4. Insert the Detachable Phone: Insert the Detachable Phone into Scout's left paw. Note: Do not insert the phone when configured as a baby gym.
Please refer to the included parent's guide for visual illustrations and additional information on assembly.
Note: For smaller babies, you can rotate the panel to make it flat so they can reach all the manipulatives. When the legs are removed, please keep them and the leg screws away from children.
If you have any further questions or need more assistance, please refer to the Leapfrog 80-604201 Scout's Get Up & Go Walker User's Guide or contact Leapfrog's Consumer Services Department at 1-800-701-5327.
Add New Comment