User Manual Q&AAnswer
Dec 23, 2024 - 01:20 AM
Sure! Here are the step-by-step instructions for setting up and using the PetSafe ZPD00-17036 Electric Display Scat Mat:
1. Remove the battery cover on the back of the controller by pressing down on the arrow and sliding it in the direction of the arrow.
2. Install a new 9V alkaline battery (not included) designed to fit one way.
3. Replace the battery cover.
4. Unroll the mat and lay it flat.
5. Slide the two bottom hooks on the back of the controller through the openings in the corner of the mat. Be careful not to touch the side buttons while attaching the controller to the mat.
6. Firmly snap the two snaps on the mat and the two snaps on the back of the controller together.
7. Place the mat in the desired location. Power on the controller by pressing and releasing the power button. The controller will calibrate automatically, displaying 2 dashed lines for 4 seconds.
8. To power off the controller, press and hold the power button for 3 seconds.
9. To test the operation of the ScatMat® training mat before adding static correction, touch 2 wires of the mat with the side of your hand. The controller should sound multiple tones as you touch the mat, and the activity counter should display a number each time.
10. To add static correction along with tone, press the up arrow button. The static correction icon will appear. With each up arrow button press, the static correction bars on the LCD display will increase from 1 bar (low) to 2 bars (medium) to 3 bars (high).
11. To remove the tone, press the up arrow button again. The tone icon will disappear as the bars start over again at 1 bar (low) and go to 2 bars (medium) and then 3 bars (high).
12. To lower the level of static correction, press the down arrow button. With each down arrow button press, the bars will decrease from 3 bars (high) to 2 bars (medium) to 1 bar (low).
13. Use the up and down arrow buttons to cycle through the settings as needed.
14. The controller holds the last setting when powering it off and on again.
15. Place your pet away from the ScatMat® training mat and allow them to wander freely around the mat. Monitor their behavior and progress.
Remember to consult the user manual for additional information and safety precautions. If you have any further questions or concerns, don't hesitate to contact the PetSafe Customer Care Center for assistance.
Add New Comment