User Manual Q&AAnswer
Dec 23, 2024 - 12:52 AM
To adjust the output voltage on the Facmogu AL-1250 Switching Power Adaptor Converter, follow these steps:
1. Locate the voltage selector switch on the adaptor. The switch is typically located on the side or bottom of the adaptor, near the DC output connector.
2. Use a small screwdriver or similar tool to slide the voltage selector switch to the desired voltage setting. The switch may have markings indicating the different voltage options, such as 3V, 4.5V, 5V, 6V, 7.5V, 9V, or 12V.
3. Ensure that the voltage setting matches the requirements of your device. Refer to your device's user manual or specifications to determine the correct voltage.
4. Once you have set the desired voltage, connect the appropriate DC tip to the adaptor's output connector. Make sure the tip is securely attached.
5. Plug the adaptor into a power outlet and connect the DC tip to your device's power socket.
6. Turn on your device to ensure it receives the correct voltage.
Note: It is important to select the correct voltage for your device to avoid damage. Using an incorrect voltage setting can result in improper functioning or even permanent damage to your device. Always refer to your device's specifications or consult the manufacturer for guidance on the appropriate voltage setting.
Add New Comment