User Manual Q&AAnswer
Dec 23, 2024 - 12:14 AM
To assemble the Fisher-Price FHF35 Share & Care Safari Playset, follow these steps:
1. Gather the required tools: a Phillips screwdriver (not included).
2. Set aside approximately 30 minutes for assembly.
3. Locate the battery door on the tree trunk and loosen the xxxx to remove the door.
4. Insert three AA (LR6) alkaline batteries into the battery compartment.
5. Replace the battery door and tighten the xxxx (do not over-tighten).
6. If the toy operates erratically, slide the power-volume switch off and back on to reset the electronics.
7. To clean the playset, use a damp cloth and avoid immersing it in water.
8. Assemble the playset by carefully pulling the treetops apart and placing the light green treetop in front of the dark green treetop. Make sure to snap all four tabs securely.
9. Once assembled, slide the power-volume switch to turn the power on with low volume, high volume, or off when finished playing.
For more detailed instructions and illustrations, refer to the Fisher-Price FHF35 Share & Care Safari Playset User Guide provided with the product.
Add New Comment