User Manual Q&AAnswer
Dec 22, 2024 - 11:55 PM
To adjust the sensitivity level on the SVD.PET TM-1260 Electronic Pet Training Mat, follow these steps:
1. Make sure the mat is turned on and the remote is within range.
2. Press the mode button on the remote to cycle through the training modes (Static, Beep, Static + Beep).
3. Once you have selected the desired training mode, press the strength button on the remote to adjust the sensitivity level.
4. There are five levels of strength available (1-5). Start with a lower level and observe your pet's response. If your pet is not deterred, gradually increase the strength level until you find the appropriate level for your pet's behavior.
5. You can test the sensitivity level by placing the tester (included with the mat) on two tracking lines of the mat. If the mat is working properly, you will hear a beep and see LED lights on the remote.
6. It's important to note that each pet may respond differently to the mat, so it may require some trial and error to find the optimal sensitivity level for your pet.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the SVD.PET TM-1260 Electronic Pet Training Mat.
Add New Comment