User Manual Q&AAnswer
Dec 22, 2024 - 11:43 PM
To change the battery in the BEICHI TPTQCM24ZS Color Changing LED Tea Lights, please follow these steps:
1. Turn off the tea light by pressing the push button switch located at the base.
2. Carefully turn the tea light upside down to access the battery compartment.
3. Locate the battery compartment cover on the bottom of the tea light.
4. Use your fingernail or a small tool to gently pry open the battery compartment cover.
5. Once the cover is open, you will see the CR2032 battery inside.
6. Remove the old battery by carefully sliding it out of the battery compartment.
7. Take a new CR2032 battery and ensure that the positive (+) side is facing up.
8. Insert the new battery into the battery compartment, making sure it is securely in place.
9. Close the battery compartment cover by pressing it back into place until it clicks or snaps shut.
10. Turn on the tea light by pressing the push button switch again.
Please note that it is important to use the correct battery type (CR2032 3V Lithium Battery) and ensure correct polarity when replacing the battery. If you are unsure about the battery replacement process or have any further questions, please refer to the user manual or contact BEICHI customer support for assistance.
Add New Comment