User Manual Q&AAnswer
Dec 22, 2024 - 11:40 PM
To replace the batteries in the AGPtek DE12 candles, follow these steps:
1. Turn off the candle: Make sure the candle is switched off by pressing the push-button at the bottom of the candle.
2. Locate the battery compartment: Flip the candle upside down to access the battery compartment. You will see a small tab or latch that secures the compartment.
3. Open the battery compartment: Use your fingers or a small tool to push the tab or release the latch. This will open the battery compartment.
4. Remove the old batteries: Take out the old CR2032 button cell batteries from the compartment. Dispose of them properly according to local regulations.
5. Insert new batteries: Take new CR2032 button cell batteries and insert them into the battery compartment, ensuring the correct polarity (+/-) alignment.
6. Close the battery compartment: Once the new batteries are inserted, close the battery compartment by securing the tab or latching mechanism.
7. Test the candle: Flip the candle back to its original position and press the push-button to turn it on. The candle should now be powered by the new batteries.
Note: It's important to use the correct type and size of batteries (CR2032) for the AGPtek DE12 candles. Improper battery usage may affect the performance and lifespan of the candles.
Add New Comment